cOmmercial Concrete Work in Ontario, CA

Complete Commercial Concrete Services in Ontario, California

Get A Free Quote

Full Name *

Email *

Phone *

About Your Project:

We provide full commercial concrete services for businesses, developers, and property managers in Ontario, California and surrounding areas. Commercial concrete work requires more than just a bigger pour — it demands planning, scheduling, and reinforcement designed for heavy loads and long-term use.

We’ve worked on warehouses, retail centers, office properties, and light industrial sites across the Inland Empire. Whether it’s a new build or a repair project, our goal is the same: get the work done safely, on time, and to the standard your business or city inspector expects.

About Our Commercial Concrete Work

Commercial jobs vary, but the basics always matter — solid base preparation, rebar or dowel placement, proper mix design, and consistent finishing. We typically use 4,000 to 5,000 PSI concrete for warehouse floors and parking areas, and we dowel adjoining slabs to prevent separation between sections.

We work closely with general contractors, engineers, and site managers to coordinate pours, access points, and curing time so the project stays on schedule. For active facilities, we section off small areas at a time to keep business operations running safely.

How We Build Quality Driveways

Every driveway follows the same process from start to finish.

We begin by removing any damaged concrete or unstable material. The base is graded and compacted so water drains away from the house or garage. Forms are set level and tight to hold the right shape.

The concrete mix is chosen for strength and consistency. Once poured, we screed, float, and edge the surface for a clean finish. Control joints are cut at the proper intervals to reduce cracking, and the slab is cured slowly to reach full strength.

Each step is checked for accuracy before moving on to the next. The result is a solid, level surface that performs for decades.

Our Complete Commercial Concrete Services

We handle a wide range of commercial and industrial concrete work, including:

Concrete flatwork for warehouses, factories, and storage facilities
Parking lot installation, replacement, and repair
Commercial concrete slabs and foundations
Footings, grade beams, and retaining walls
Curbs, gutters, and sidewalks for retail and office properties
Loading docks and concrete ramps
Dumpster pads and service area slabs
ADA-compliant ramps and accessible walkways
Concrete demolition and replacement
Tilt-up and site preparation work
Heavy-duty drive lanes and truck aprons
Concrete cutting, coring, and saw-joint repair

If your project isn’t listed here, we can still help. We handle most types of commercial flatwork and structural concrete outside of large high-rise or bridge projects.

Why Commercial Concrete Work Requires Experienced Contractors

Commercial concrete isn’t just about strength — it’s about usability and compliance.

Poorly poured slabs can lead to uneven floors, drainage issues, or premature cracking under forklifts and trucks. We use mix designs matched to the project’s load requirements, including fiber reinforcement and vapor barriers for interior slabs.

We also pay attention to slope and grading. In parking lots and loading zones, water must drain correctly to prevent ponding and deterioration. For retail and office properties, clean finishing and edging create a professional appearance that holds up under foot traffic.

The investment in your concrete installation is an investment in the foundation of your business. This is something you'll only have to do once. Make sure your concrete installation is done right, so that the literal foundation of your business isn't the reason for down time or missed revenue. We can work around your operating hours and on tight schedules over holidays to keep your business running smoothly during concrete projects.

Repairs and Maintenance for Commercial Properties

Not every problem needs full replacement. We provide commercial concrete repair and resurfacing for parking lots, curbs, and warehouse floors. We can saw-cut damaged sections, remove and replace small panels, or resurface high-traffic areas with bonded overlays.

We also handle joint sealing and crack repair, which helps keep water and debris out of expansion joints and prolongs the life of the surface. For businesses with tight schedules, we can perform repairs after hours or in phases to reduce downtime.

How We Manage Commercial Projects

Plan carefully, work safely, and keep communication open. We walk each site with the client or project manager before starting and confirm layout, grade, and reinforcement. During the pour, we stay in touch with inspectors and other trades to keep the project moving without delays.

After the pour, we finish and cure the concrete based on its use — whether it’s a forklift floor, pedestrian area, or outdoor slab. We follow up with sealer application or joint cutting if required by spec.

The last thing your business should have to worry about is compliance issues, insurance claims or operating down time. Contact us today, and we'll walk you through how to avoid all the common headaches business owners face during capital expenditure on concrete installation and repair.

(909) 757-0916

Get A Free Quote

Full Name *

Email *

Phone *

About Your Project:

Frequently Asked Questions (FAQs)

How long do commercial concrete projects take?

It depends on the size and scope of the job. Small projects like ramps or walkways can be done in a few days. Larger jobs such as warehouse floor installation or parking lot replacement may take several weeks, including prep and curing time. We schedule work to limit disruption to your business whenever possible.

What type of concrete mix do you use for commercial work?

We typically use 4,000 to 5,000 PSI concrete for exterior flatwork and interior slabs. For heavy equipment or constant forklift traffic, we may use fiber-reinforced mixes or add dowels and rebar for extra load support. The mix is chosen based on your site conditions and the job’s purpose.

Can you work around active business operations?

Yes. We regularly pour and repair concrete in occupied properties and industrial sites. We section off areas, set up barriers for safety, and schedule pours outside of peak hours if needed. This keeps your business running while the work gets done.

Get a Free Estimate

We offer clear, written quotes for every driveway project. The estimate includes removal, base prep, reinforcement, pour, and finish. You’ll know the exact cost and timeline before work begins.

Tell us about your project and schedule a free on-site visit. We’ll inspect the area, explain your options, and provide a detailed plan that fits your property and budget.